The Series 700 is comprised of the highest quality components in
conjunction with a proprietary anchoring system. Our standard
components and features are the competition's upgrades. Compare the
following:
Doors
18 gauge galvanized (A60), polyurethane insulated core,
interlocking seam. Doors meet commercial Steel Door Institute (SDI)
standards.
Frames
Welded frame.16 gauge galvanized (A60), 5 3/4" standard frame
profile, interlocking corner connection (then welded). Frames meet
commercial Steel Door Institute (SDI) standards.
Specialty Doors/Frames
From transom doors and frames to bullet resistant to
stainless steel, EXPI-DOOR can create almost any kind of
opening.
Locks
EXPI-DOOR® Grade 1 commercial lever lock. Meets ANSI A156.2 series
4000, grade 1 requirements - 800,000 cycle test. Five-year
warranty. Thru bolted for added strength. Free wheeling vandal
resistant lever.
Subjambs
Proprietary offset subjamb/jamb anchor system - tested to 1,000,000
cycles.16 gauge galvanized (A40 minimum) subjamb. Polyethylene
block anchors stiffen jambs and allow for offset design. Self
trimming, no jamb trim required.
Paint Finish
All doors and frame have a baked-on beige primer coat meeting ANSI
A250.1 standards. Paint test for salt spray, humidity, and
adhesion.
Hinges
Ball bearing silver powder coat hinges with security non-removable
pins.
Other
Full 5 3/4" aluminum threshold, dual finger TPE sweep, and urethane
foam weatherseal for kerfless type application. All components meet
commercial standards and ADA requirements. Doors are individually
packaged with a wood skid base, corrugated box, and internal
foam-in-place protective blocks.
Schlage Grade 2 Lever Lock
Schlage AL53PD Grade 2 Entrance lock. Thru bolted and heavy duty
compression springs. Three-year warranty.
Schlage Grade 1 Lever Lock
Schlage ND53PD Grade 1 Entrance lock. Vandal-resistant free
wheeling levers. Independent heavy duty spring cages for lever
support. Thru bolted for positive interlock to door. Tested to
3,000,000 cycles. Seven-year warranty.
Schlage Mortise Lever Lock
Schlage heavy duty grade 1 mortise lever lockset with escutcheon
plate. 3/4" latch throw and 1" deadbolt throw. Three-year
warranty.
Von Duprin Exit Devices
Various heavy duty grade 1 rim exit devices from Von Duprin (Series
22 and 99) and Falcon (25 Series). Various finishes and trim
options. Three-year warranties.
LCN Auto Closers
Heavy duty grade 1 surface applied closer. Backcheck, sweep and
latch speed adjustment valves. LCN Series 1261, 1461 and 4041.
Ten-year warranty.
